Construction · Colorado

Colorado Construction Sales Tax Guide

ByGerald J. Donnini II, Esq.·Tax Attorney

Table of Contents

  • Introduction
  • Nexus Standard / Physical NexusIndependent Contractor TriggersEconomic Nexus
  • Standard / Physical Nexus
  • Independent Contractor Triggers
  • Economic Nexus
  • General Rules Real Property vs. Tangible Personal Property (TPP)FixturesState-required FormsTwo-State Tax Treatment Models
  • Real Property vs. Tangible Personal Property (TPP)
  • Fixtures
  • State-required Forms
  • Two-State Tax Treatment Models
  • Mixed Use Contractors
  • Subcontractors
  • Exempt Transactions
  • Incentives
  • Sourcing Rules
  • Audit Considerations
  • Voluntary Disclosure Agreements (VDAs)
  • Tax Collected Issues
  • Conclusion
  • References and Resources
  • Standard / Physical Nexus
  • Independent Contractor Triggers
  • Economic Nexus
  • Real Property vs. Tangible Personal Property (TPP)
  • Fixtures
  • State-required Forms
  • Two-State Tax Treatment Models

1. Introduction

Colorado construction sales tax compliance isn't just complex, it's a financial minefield for contractors, CFOs, and construction professionals who underestimate its intricacies. The state's dual treatment of contractors as either consumers paying tax on materials or retailers collecting tax from customers creates countless opportunities for costly missteps. Whether you're a general contractor managing lump-sum projects, a specialty contractor operating retail showrooms, or a CFO overseeing multi-state construction operations, understanding Colorado's classification system is critical to avoiding double taxation and audit assessments.

The stakes are particularly high in Colorado due to the state's unique contractor rules and complex local tax structure. Misclassifying a project as real property improvement instead of tangible personal property sales, or vice versa, can trigger audit scrutiny that reaches back years and results in six-figure assessments. Add Colorado's intricate web of state-administered and home-rule local jurisdictions, each with varying rates and exemption rules, and you have a compliance challenge that demands expert navigation.

For construction businesses operating in Colorado, the fundamental question isn't whether you'll encounter complex tax situations, it's whether you'll handle them correctly before they become expensive audit findings. This guide provides the technical depth and practical insights necessary to make informed compliance decisions while protecting your bottom line from Colorado's most common construction tax traps.

2. Nexus

Understanding nexus—the connection between your business and Colorado that creates tax obligations—is fundamental for construction companies operating in or with Colorado customers. Nexus determines whether your business must register for Colorado sales tax, collect tax from customers, and comply with Colorado's filing and payment requirements. For construction businesses, nexus considerations are particularly complex because work often involves physical presence across state lines, the use of independent contractors, and large-dollar projects that can quickly trigger economic thresholds.

The consequences of misunderstanding nexus can be severe. Operating without proper registration when nexus exists can result in significant penalties, unlimited lookback periods for tax assessment, and extended audit investigations. Conversely, registering unnecessarily when no nexus exists creates ongoing compliance burdens and costs. Colorado's nexus rules have evolved significantly in recent years, particularly with the implementation of economic nexus thresholds and clarifications around independent contractor relationships.

Standard Nexus

Colorado nexus is established through physical presence in the state, which includes:

  • Physical Locations: Maintaining an office, warehouse, storage facility, or any place of business in Colorado
  • Employees: Having employees working in Colorado, including salespeople, installation crews, or project managers
  • Property: Owning or leasing equipment, vehicles, or other property in Colorado
  • Regular Business Activities: Conducting ongoing business operations within the state

For construction businesses, physical nexus is often established through project sites, employee activities, or equipment storage, even if the company's headquarters is located elsewhere.

Example: An Arizona-based roofing contractor regularly performs work in Colorado, storing equipment at various job sites and employing installation crews who work exclusively on Colorado projects. This activity establishes Colorado nexus, requiring registration and compliance with Colorado sales tax laws.

Independent Contractor Triggers

Critical Issue: Hiring independent contractors to perform services in Colorado can create nexus for out-of-state businesses, even without other physical presence in the state. This often-overlooked nexus trigger catches many construction companies off-guard during audits.

Colorado considers the following activities by independent contractors as potentially creating nexus for the hiring entity:

  • Installation Services: Independent contractors performing installation work on behalf of an out-of-state company
  • Repair and Maintenance: Ongoing service relationships involving tangible personal property
  • Construction Activities: Independent contractors performing construction work under direction of the hiring company

Key Factors that determine whether independent contractor activities create nexus:

  • Level of control exercised over the contractor
  • Frequency and duration of activities
  • Training provided by the hiring company
  • Whether the contractor represents multiple companies
  • Direct supervision of work performed

Example: A Texas-based HVAC equipment manufacturer hires independent contractors in Colorado to install and service their equipment. The manufacturer provides training, requires contractors to follow specific installation procedures, and maintains ongoing relationships with these contractors. This arrangement likely creates Colorado nexus for the Texas manufacturer, requiring registration and tax compliance.

Economic Nexus

Colorado recognizes economic nexus for any vendor with $100,000 or more retail sales in the state during the current or previous calendar year. Once economic nexus is established, businesses are obligated to collect sales tax from buyers in the state.

Important Considerations for Contractors:

  • If a contractor only performs real property improvements under lump-sum contracts, exceeding the $100,000 threshold does not trigger sales tax nexus. However, contractors making retail sales—such as through time-and-materials contracts or over-the-counter sales—must count those toward the threshold.”
  • All Retail Sales Count: All retail sales of tangible personal property, commodities, and services are included in the threshold calculation

Registration Timeline: If you exceed the threshold in the current year, you must register and begin collecting tax by the first day of the first month that begins at least 90 days after you pass the threshold. If you exceed the threshold in the prior year, you must begin collecting on January 1.

Example: A North Carolina specialty contractor performs three large commercial projects in Colorado totaling $150,000 in revenue. Even though the work might be classified as non-taxable real property improvements, the contractor has exceeded Colorado's economic nexus threshold and must register for sales tax purposes.

Registration Requirements: Once nexus is established, contractors must register with the Colorado Department of Revenue using the Colorado Sales Tax/Withholding Account Application (CR 0100) before conducting taxable business activities in the state.

3. General Rules

The foundation of Colorado construction tax compliance rests on understanding how the state classifies different types of construction work and the resulting tax obligations. Unlike many other industries where tax treatment is relatively straightforward, construction presents unique challenges because the same materials and labor can be subject to dramatically different tax treatment depending on the nature of the work performed, the type of contract structure, and the permanence of the installation.

Colorado's approach to construction taxation reflects a fundamental principle: tax should be collected once on every transaction, but not twice. This principle drives the state's classification system, which determines whether contractors act as final consumers of materials (paying tax when they purchase) or as retailers (collecting tax from customers). The distinction affects not only the total tax burden but also cash flow, competitive positioning, and compliance complexity.

Real Property vs. Tangible Personal Property (TPP)

The distinction between real property improvements and tangible personal property sales is fundamental to Colorado construction tax compliance. This classification determines not only whether the transaction is taxable, but also who owes the tax and at what stage.

Real Property includes land, buildings, and items that become permanently attached to the land or structures. Construction and building materials are materials that are incorporated into real property to such an extent that they lose their identity as tangible personal property and become an integral, permanent, and inseparable part of real property.

Examples of Real Property Improvements:

  • Dimensional lumber and drywall
  • Electrical systems and wiring permanently installed in buildings
  • Plumbing and fixtures that become part of the structure
  • Roofing and structural work
  • Masonry and concrete work
  • Built-in systems and components
  • Garage doors
  • Electrical fixtures

Tangible Personal Property is property that can be seen, weighed, measured, touched, or is in any manner perceptible to the senses, but is not permanently attached to real property.

Examples of Tangible Personal Property:

  • Stoves
  • Refrigerators
  • Furnaces
  • Air conditioners
  • Washing machines
  • Dryers
  • Carpets
  • Ready-made cabinets
  • Storm doors
  • Storm windows
  • Screens
  • Sod

Key Determination Factors:

  • Degree of Attachment: How permanently the item is connected to the structure
  • Intent of Installation: Whether the item was intended to be permanent
  • Customization: Whether the item was specifically fitted for the location
  • Integration: Whether the item becomes an integral part of the real property

Fixtures

Certain items a contractor may buy or sell do not qualify as construction and building materials because they are a complete unit not made to order or because they are not incorporated into real property in such a way as to become integral and inseparable parts of the real property. Unlike some states, Colorado does not classify 'fixtures' as a separate taxable category. Instead, items are taxed based on whether they become permanently attached and integrated into the real property.

Colorado uses specific criteria to determine whether items constitute fixtures that become part of real property or remain tangible personal property. The determination often depends on the specific installation method and the degree to which the item becomes integrated into the building structure.

State-Required Forms

Colorado does not require a specific real property election form. However, contractors must maintain proper documentation to support their tax treatment classification:

Required Documentation:

  • Detailed contracts clearly describing work to be performed
  • Material purchase invoices showing tax paid or exempt status
  • Resale certificates for materials purchased tax-exempt (for retailer-contractors only)
  • Project specifications and installation methods

Registration Requirements: Retailer-contractors must apply for, obtain, and maintain a valid Colorado sales tax license using the Colorado Sales Tax/Withholding Account Application (CR 0100).

Two-State Tax Treatment Models

Colorado construction taxation follows two primary models depending on the nature of the work:

Model 1 – Sales Tax on Materials (Real Property Contractor Model)

In a lump-sum contract, a single price is stated for the entire contract; the contract does not state the price of construction and building materials separately from the price of labor. For lump-sum contracts, the contractor is treated as the consumer of all construction and building materials included in and associated with the contract.

Contractor Responsibilities:

  • Pay sales tax to suppliers on all material purchases
  • Do not charge customers sales tax on labor or materials
  • Absorb sales tax cost as part of project expenses
  • No sales tax license required for lump-sum contracts only

Applicable Contract Types:

  • Lump sum contracts
  • Fixed fee contracts
  • Any contract where materials and labor are not separately stated

What Counts as Taxable Materials:

  • All construction and building materials that become part of real property
  • Fabricated items used in construction

NOTE ON FABRICATION: Equipment consumed in the projeWhen a contractor fabricates tangible personal property—whether on or off the job site—prior to its installation into real property, the contractor is considered the retailer and must collect sales tax on the full fabricated item, including labor and materials. Rule 39‑26‑713‑1, Colorado Administrative Code

Example: A contractor enters into a lump-sum contract with a homeowner to build a garage for $29,000. The contractor purchases $15,000 of construction materials and pays state sales tax on the $15,000 purchase price (or use tax if purchased out of state). The contractor does not collect any sales tax from the homeowner.

Model 2 – Sales Tax on TPP + Labor (Retailer Model)

Time-and-materials contracts state the price for construction and building materials separately from the price of labor. Under this type of contract, the contractor is treated as a retailer, not the consumer, of the construction and building materials.

Contractor Responsibilities:

  • Purchase materials tax-exempt using a resale certificate
  • Collect and remit sales tax on the full invoice (materials + labor)
  • Register as a dealer with the Colorado Department of Revenue
  • Must obtain and maintain a valid Colorado sales tax license

Applicable Activities:

  • Time-and-materials contracts
  • Installation of non-building materials (tangible personal property)
  • Repair of tangible personal property with parts
  • Retail sale plus installation contracts

Tax Calculation: The contractor must collect sales tax from its customer on the marked up price of the materials included in the time-and-materials contract and remit the collected tax to the Department of Revenue. However, a retailer-contractor should not collect tax on installation or labor charges if such charges are listed separately on the bid proposal, sales invoice, or contract.

Example: Using a time-and-materials contract, the contractor separately states a price of $19,000 (including $4,000 in mark-up) for construction materials and $10,000 for labor. The contractor does not pay sales tax when purchasing materials but must collect state sales tax from the homeowner on the $19,000 price for materials. The contractor does not collect sales tax on the $10,000 labor charge.

4. Mixed Use Contractors

The reality of the modern construction industry is that many businesses don't fit neatly into a single tax classification category. Mixed use contractors—those who operate both as traditional contractors performing real property improvements and as retailers selling tangible personal property—face unique compliance challenges that require sophisticated understanding of when different tax rules apply to different aspects of their business operations. The financial stakes of getting these determinations wrong can be enormous, often resulting in six-figure audit assessments, penalties, and extended compliance reviews.

These hybrid business models have become increasingly common as construction companies diversify their service offerings to remain competitive and capture additional revenue streams. A cabinet shop might operate a retail showroom selling materials to walk-in customers while also providing full-service installation for custom residential and commercial projects. An HVAC company might sell replacement units from inventory while also designing and installing complete commercial systems. While these diversified business models can be highly profitable, they create a complex web of tax obligations that can easily trap unwary businesses.

A retailer-contractor is a contractor who also makes retail sales of construction and building materials, non-building materials, or both. A retailer-contractor generally makes retail sales in one of two ways: 1) in the fulfillment of time-and-materials contracts, or 2) as retailers who make "over-the-counter" sales of non-building materials that the retailer may or may not install for the customer.

The High-Stakes Challenge of Classification

The fundamental challenge facing mixed-use contractors is that identical materials and identical work can be subject to completely different tax treatment depending on subtle distinctions in contract structure, installation methods, and business operations. A single misclassification error can cascade across dozens of projects over multiple years, creating substantial tax exposure that threatens business viability.

Critical Risk Areas:

Inventory Management Mistakes: Using the same inventory for both retail sales and construction projects without proper tracking can result in:

  • Use Tax Assessments: When materials purchased tax-exempt for resale are used in lump-sum contracts
  • Double Taxation: Paying tax both on purchase and collection from customers
  • Lost Exemption Rights: Improper use of resale certificates can result in loss of exemption privileges

Contract Inconsistencies: Applying different tax treatment to similar projects can trigger audit scrutiny and result in:

  • Reclassification Risk: Auditors may reclassify all similar transactions to match the highest tax treatment
  • Penalty Exposure: Inconsistent application may be viewed as negligent compliance
  • Competitive Disadvantage: Incorrect tax treatment can lead to non-competitive bidding

Complex Mixed Use Scenarios and Tax Exposure

Showroom and Installation Operations: Contractors who sell materials from a showroom and also provide installation services must distinguish between retail sales and installation work.

  • Retail Sales: Materials sold for customer pickup are taxable sales requiring tax collection
  • Installation Projects: May be taxable TPP installation or non-taxable real property work depending on the final classification
  • Critical Error: Treating showroom sales as non-taxable can result in significant tax assessments plus penalties on all retail transactions

Time-and-Materials vs. Lump-Sum Projects: The same contractor might use different contract types for different projects, requiring different tax treatment:

  • Time-and-Materials: Contractor acts as retailer, collecting tax on materials
  • Lump-Sum: Contractor acts as consumer, paying tax on material purchases
  • Danger Zone: Mixing contract types without proper documentation creates audit red flags and potential reclassification of all projects

Repair vs. New Construction: The same contractor might perform both repair work (typically taxable) and new construction (typically real property).

  • Repair Work: Usually treated as taxable sales of tangible personal property plus installation
  • New Construction: Often treated as non-taxable real property improvements
  • Gray Areas: Renovation and remodeling projects that blur the line between repair and new construction

Custom vs. Standard Products: The degree of customization can affect tax treatment:

  • Custom Fabrication: May qualify as real property improvement
  • Standard Products: Likely taxable tangible personal property regardless of installation
  • Assembly vs. Manufacturing: Where fabrication occurs can change tax obligations

The Catastrophic Cost of Getting It Wrong

Real-World Impact Example: A Colorado kitchen cabinet business operated for five years believing all their work qualified as real property improvements. During an audit, the Colorado Department of Revenue determined that 60% of their projects involved installation of "ready-made cabinets" that constituted taxable tangible personal property sales. The result:

  • Tax Assessment: $180,000 in unpaid sales tax
  • Penalties: $54,000 for negligent underreporting
  • Interest: $31,000 accumulated over the audit period
  • Professional Fees: $25,000 in legal and accounting costs
  • Total Impact: Over $290,000 threatening business survival

Penalty Escalation: Colorado imposes increasingly severe penalties for tax compliance failures:

  • Negligent Underreporting: 10% penalty on unpaid tax
  • Intentional Disregard: 25% penalty plus potential criminal referral
  • Fraud: 75% penalty plus criminal prosecution risk
  • Collected but Not Remitted: Criminal penalties and potential jail time

Documentation Requirements and Compliance Traps

A retailer-contractor must obtain a sales tax license, may purchase items for resale tax-free, and must keep detailed records to demonstrate the collection and/or payment of all applicable sales and use taxes on all purchased items.

Critical Documentation Requirements:

  • Separate Accounting: Maintain distinct accounting for different types of transactions with clear audit trails
  • Contract Clarity: Clearly specify whether transactions involve retail sales, installation services, or real property improvements
  • Resale Certificate Management: Only use resale certificates for materials genuinely purchased for resale - misuse can result in fraud penalties
  • Registration Compliance: Register as a dealer when conducting retail sales of tangible personal property
  • Project Classification Records: Document the basis for each project's tax treatment classification

Common Documentation Failures:

  • Inadequate Contract Language: Vague descriptions that don't clearly establish the nature of work
  • Poor Record Keeping: Failure to maintain separate records for different types of business activities
  • Missing Exemption Certificates: Lack of proper documentation for tax-exempt sales
  • Inconsistent Coding: Accounting systems that don't properly track different transaction types

Use Tax Obligations: A retailer-contractor must also report and remit use tax on any items removed from stock for his or her own use, such as for the fulfillment of a lump-sum contract. This requirement is frequently overlooked and can result in substantial additional assessments during audits.

Industry-Specific Risk Scenarios

Kitchen and Bath Contractors:

  • High-Risk Items: Cabinets, appliances, fixtures that may be classified as ready-made TPP
  • Installation Complexity: Built-in vs. freestanding items require different tax treatment
  • Custom vs. Standard: Degree of customization affects real property classification

HVAC Contractors:

  • Equipment Sales: Replacement units often taxable TPP regardless of installation complexity
  • System Integration: New construction systems may qualify as real property
  • Service Calls: Repair work with parts typically taxable

Electrical Contractors:

  • Fixture Sales: Light fixtures and electrical devices often classified as TPP
  • Wiring vs. Devices: Rough electrical work typically real property, device installation often TPP
  • Smart Home Technology: Modern electronic systems create classification challenges

Flooring Contractors:

  • Material Types: Carpet often classified as TPP, while tile and hardwood may qualify as real property
  • Installation Methods: Permanent vs. temporary installation affects classification
  • Retail Showrooms: Samples and materials sold for customer installation create retailer obligations

The Critical Importance of Professional Guidance

Given the complexity and high financial stakes involved in mixed-use contractor operations, professional tax consultation is not a luxury—it's a business necessity. The cost of professional guidance is minimal compared to the potential financial devastation of audit assessments, penalties, and compliance failures.

When to Seek Professional Help:

  • Business Model Changes: Any expansion into new service areas or market segments
  • Large Projects: High-dollar projects that could significantly impact overall tax obligations
  • Audit Triggers: Any contact from tax authorities or unusual audit activity in your industry
  • Classification Uncertainty: Any doubt about whether work constitutes real property or TPP
  • Multi-State Operations: Expansion into new states with different tax rules
  • Technology Integration: New materials or installation methods that create classification questions

What Tax Professionals Can Provide:

  • Classification Analysis: Detailed review of business operations to determine proper tax treatment
  • Compliance Systems: Design of accounting and documentation systems to support proper tax treatment
  • Contract Development: Preparation of contract language that clearly establishes tax treatment
  • Training Programs: Staff education on tax compliance requirements and red flags
  • Audit Defense: Professional representation in the event of tax authority inquiries
  • Voluntary Disclosure: Assistance with correcting past compliance errors through VDA programs

Example: A flooring contractor operates a showroom selling carpet and tile to walk-in customers (retail sales) and also provides installation services. When selling carpet from the showroom for customer pickup, the contractor collects sales tax as a retailer. When providing complete installation services under a lump-sum contract, the contractor pays tax on materials when purchased and does not charge the customer sales tax. However, the contractor must maintain completely separate tracking for inventory used in each type of transaction and ensure that materials purchased tax-exempt for resale are never used in lump-sum contracts without paying use tax.

The Bottom Line: Mixed-use contractors operate in one of the most complex areas of state tax law. The potential for costly errors is substantial, and the financial consequences of getting it wrong can be business-threatening. Professional guidance isn't just recommended—it's essential for protecting your business and ensuring long-term viability in Colorado's challenging tax environment.

5. Subcontractors

The subcontractor relationship in Colorado construction projects creates specific tax obligations that depend on the nature of the work performed rather than the contractual relationship between parties. Unlike employee relationships where tax responsibilities are clear, subcontractor arrangements involve independent business entities, each with their own potential tax obligations, creating situations where the same project might involve multiple parties with different tax treatment requirements for similar work.

Subcontractors in Colorado are generally treated the same as prime contractors for sales tax purposes. The nature of the work, not the contractual relationship, determines tax obligations. This means a subcontractor performing real property improvements is subject to the same tax rules as a prime contractor doing identical work, while a subcontractor installing tangible personal property must follow retailer requirements regardless of their position in the contractor hierarchy.

Subcontractor Tax Responsibilities:

Real Property Subcontractors:

  • Pay sales tax when purchasing materials for lump-sum contracts
  • Do not charge general contractors sales tax on their services
  • Absorb material taxes as project costs
  • No sales tax license required for real property work only

TPP Installation Subcontractors:

  • May purchase materials tax-exempt for resale (if registered as dealers)
  • Charge sales tax to general contractors on materials (but not labor if separately stated)
  • Must be registered with Colorado Department of Revenue
  • Follow time-and-materials contract rules

Sales Between Contractors: Transactions between general contractors and subcontractors depend on the nature of the work being performed:

  • Real Property Work: Subcontractor charges general contractor for labor only; no sales tax applies to the transaction between contractors
  • TPP Installation: Subcontractor may charge general contractor sales tax on materials if the sub is acting as a retailer under time-and-materials arrangements

Documentation Requirements:

  • Subcontractors must maintain the same documentation standards as prime contractors
  • Contracts should clearly specify the nature of work to support tax treatment
  • Resale certificates should only be used when subcontractor is registered as a dealer and genuinely reselling materials

Licensing Requirements: The requirement applies to retailer-contractors that sell raw, unaltered construction and building materials (through a retail store, for example), as well as to retailer-contractors that enter into time-and-materials contracts.

Example: An electrical subcontractor installs wiring for a new office building (real property improvement) under a lump-sum subcontract. The subcontractor pays sales tax when purchasing wire, conduit, and electrical panels. The subcontractor bills the general contractor for labor only and does not charge sales tax on the invoice. The general contractor pays the subcontractor's invoice without additional tax.

Compliance Considerations:

  • Subcontractors working with multiple general contractors must ensure consistent tax treatment across all projects
  • Registration requirements apply regardless of subcontractor status
  • Prime contractors should verify subcontractor tax compliance to avoid project complications

6. Exempt Transactions

Navigating Colorado's sales tax exemption landscape requires construction professionals to understand not only which transactions may qualify for exempt treatment, but also the complex documentation and procedural requirements that must be satisfied to properly claim and defend these exemptions. Exempt transactions represent significant opportunities for cost savings on construction projects, but they also present substantial compliance risks if not handled correctly.

Colorado's exemption system reflects policy decisions to remove sales tax burden from certain types of organizations and activities deemed beneficial to the public interest. However, the state also recognizes that exemptions can be subject to abuse and has implemented strict requirements to ensure that only legitimate exempt transactions receive favorable treatment.

Sales to Government Entities

Federal Government: Sales of materials and services to the federal government are generally exempt from Colorado sales tax when payment is made directly by the federal agency.

State and Local Government: Construction and building materials a contractor purchases for use in construction projects for tax-exempt entities are exempt from state sales and use tax. The sales and use tax exemption applies only to construction and building materials that become part of structures, highways, roads, streets, or other public works owned and used by governmental entities (including the United States, the State of Colorado, and any city, county, or special district in Colorado), their departments, and institutions, but only in their governmental capacities.

Requirements for Government Exemptions:

  • A contractor must apply for an exemption certificate prior to starting work on any tax-exempt construction project
  • Government entity must meet specific ownership and use requirements
  • Exemption applies only to materials that become part of the public works

Sales to Nonprofits

Charitable organizations, but only in the conduct of their regular charitable functions, and schools, other than schools held or conducted for private or corporate profit may qualify for sales tax exemptions on construction materials.

Nonprofit Requirements:

  • Organization must qualify under Colorado's charitable organization regulations
  • Materials must be used for the organization's exempt charitable, religious, or educational purposes
  • Proper exemption certificates must be obtained and maintained

Exemption Certificate Process

A contractor must complete and submit a Contractor Application for Exemption Certificate (DR 0172) to the Department of Revenue for any tax-exempt construction project. Along with the completed application, the contractor must submit a copy of the contract or agreement page identifying: 1) the contracting parties; 2) the bid amount; 3) the type and scope of work; and 4) signatures of contracting parties.

Important Limitations: The exemption does not apply to purchases or rentals of equipment, supplies, or tools by a contractor that the contractor uses to perform construction services for a tax-exempt entity.

Documentation Requirements:

  • An exemption certificate will not be issued for any application that is not complete, accurate, and signed or for any application submitted without a fully executed contract or agreement page identifying all of the required information
  • The contractor must obtain a separate certificate for each tax-exempt construction project. A prime (general) contractor must obtain one certificate for the project and issue copies of the certificate to any subcontractor performing work for the project
  • Burden of proof for exempt status falls on the contractor

Example: A contractor performing work for a municipal water treatment facility must complete Form DR 0172 and provide a copy of the signed contract with the city. Once approved, the contractor's material suppliers can accept the exemption certificate and sell materials tax-exempt for use in the public works project.

Warning: Contractors cannot use a customer's tax-exempt status to purchase materials for use in construction contracts without following proper exemption certificate procedures. Each exemption has specific requirements for who can purchase materials tax-exempt and under what circumstances.

7. Incentives

Colorado offers several economic development incentives that can provide sales tax benefits for construction projects, though the landscape of available programs has evolved over time. These incentives reflect Colorado's recognition that targeted tax benefits can attract business investment, create jobs, and revitalize specific geographic areas or industry sectors. For construction companies, understanding and properly utilizing these incentives can provide competitive advantages and improved project profitability.

The key aspect of Colorado's incentive programs is that many require pre-approval or pre-application before project commencement. This means construction businesses and their clients must identify potential incentive opportunities early in the project planning process and build incentive compliance requirements into project timelines and procedures.

Enterprise Zone Program

Colorado's Enterprise Zone program provides tax incentives for businesses in designated economically distressed areas. While the program has been restructured over time, qualified businesses may still receive benefits including:

  • Credits for job creation and investment
  • Potential sales tax benefits on certain purchases
  • Accelerated depreciation for equipment

Renewable Energy Incentives

Colorado has various programs supporting renewable energy development:

  • Solar and renewable energy system installations may qualify for sales tax exemptions
  • Energy-efficient building materials meeting specific criteria may qualify for favorable treatment
  • Green building certifications may provide access to additional incentives

Local Incentive Programs

Many Colorado municipalities and counties offer their own incentive programs:

  • Economic development zones with local tax benefits
  • Tax increment financing (TIF) districts
  • Special improvement districts with unique tax structures

Application Requirements:

  • Pre-approval generally required before project commencement
  • Specific documentation and reporting requirements
  • Compliance with job creation and investment thresholds
  • Ongoing compliance obligations may extend beyond project completion

Example: A manufacturer constructing a new facility in a qualifying area may be eligible for various state and local incentives that could include sales tax benefits on building materials and equipment, significantly reducing project costs and providing competitive advantages for the construction contractor.

For current information on available incentives, businesses should consult the Colorado Office of Economic Development and International Trade and local economic development authorities.

8. Sourcing Rules

Colorado's sourcing rules determine which tax rates apply to construction transactions, and for an industry that frequently operates across county and municipal lines, understanding these rules is essential for accurate tax calculation and compliance. Sourcing rules become particularly complex in construction because projects often involve materials purchased in one location, delivered to another, and installed in a third, with work potentially spanning multiple tax jurisdictions.

The basic principle underlying Colorado's sourcing rules is destination-based taxation for most transactions, meaning that tax rates are generally determined by where the customer receives the benefit of the goods or services. However, applying this principle to construction transactions requires careful analysis of the specific type of work being performed, the nature of the contract, and the various locations involved in material procurement, delivery, and installation.

Construction Project Sourcing

Contractors are required to pay state and state-administered local sales taxes applicable to the location at which the contractor takes possession of the purchased materials, whether the contractor takes possession at the seller's store or at a different location to which the seller delivers the purchased materials to the contractor.

Real Property Improvements: For lump-sum contracts, tax is generally calculated using the rate where the contractor takes delivery of materials, not necessarily where the construction work is performed.

Time-and-Materials Contracts: For retailer-contractors collecting tax from customers, the location where services are performed typically determines the applicable rate.

Tangible Personal Property Installations: Installation work is generally sourced to the location where the installation takes place.

Multi-County Projects

For projects spanning multiple counties, contractors must carefully determine the appropriate tax rate. Contractors must separately comply with home-rule jurisdictions, which administer their own tax laws, license requirements, and sourcing rules. State-administered location sourcing rules do not apply in these jurisdictions:

  • Material Delivery Location: Tax rate where materials are delivered to the contractor
  • Work Performance Location: Tax rate where the actual construction work is performed
  • Customer Location: In some cases, the customer's business location may determine the rate

Local Tax Considerations

Colorado's complex local tax structure requires special attention:

  • State Rate: 2.9% applies statewide
  • Local Surtaxes: Counties, cities, and special districts can impose additional sales tax
  • Home-Rule Cities: Some cities like Denver and Colorado Springs administer their own sales taxes with different rules
  • State-Administered vs. Self-Administered: The Colorado Department of Revenue administers taxes for most jurisdictions, but not for home-rule cities

Building Permit Exemptions

Under Colorado law, no city or county sales tax is imposed on the sale of construction and building materials if both of the following conditions are met:

  • The purchaser presents to the seller a building permit or similar documentation, and
  • The building permit or similar documentation shows that local use tax has been paid or is required to be paid.

Building permits do not affect the collection and payment of state or special district taxes on construction and building materials.

Cross-Border Considerations

Out-of-State Material Purchases: Contractors and retailers are required to remit consumer use tax for any taxable items for which they have not otherwise remitted sales or use tax, including purchases made from vendors located outside of Colorado who do not collect Colorado sales or use tax.

Multi-State Projects: When materials are purchased tax-free out-of-state and brought into Colorado for construction projects, Colorado use tax applies. Credit is allowed for sales tax paid to other states up to Colorado's rate.

Tax Rate Information

Current Colorado sales tax rates consist of:

  • State Rate: 2.9% on all taxable transactions
  • Local Rates: Vary by jurisdiction, can reach 5% or more in some areas

Rate Lookup Tools:

Example: A contractor based in Denver (with complex local tax structure) performs work in Boulder County. Materials delivered to the Boulder County job site are subject to Boulder County's rates, not Denver's rates. The contractor must calculate tax based on where materials are delivered or where services are performed, depending on the type of transaction.

9. Audit Considerations

Sales tax audits represent one of the most significant compliance risks facing construction businesses in Colorado. The complexity of determining proper tax treatment for construction transactions, combined with the high-dollar nature of construction projects and the industry's frequent cross-border activities, makes construction companies particularly attractive targets for audit activity. Understanding the audit process, common triggers, and effective defense strategies is essential for minimizing audit risk and achieving favorable outcomes when audits do occur.

Colorado Department of Revenue audits of construction businesses are typically comprehensive examinations that can span multiple years and involve detailed review of hundreds of transactions across dozens of projects. Auditors understand the complexity of construction tax rules and are specifically trained to identify common areas of non-compliance, including misclassification of real property versus tangible personal property work, improper use of exemption certificates, and nexus issues involving out-of-state contractors.

Common Audit Triggers for Construction Businesses

Classification Inconsistencies: Inconsistent treatment of similar items across different projects often triggers auditor attention. For example, treating kitchen appliances as real property in some projects and tangible personal property in others without clear justification.

Contract Type Variations: Mixing lump-sum and time-and-materials approaches without proper documentation or consistent application of tax rules for each contract type.

Underreported TPP Sales: Failure to collect and remit tax on tangible personal property installations while properly treating real property improvements.

Missing Documentation: Lack of proper exemption certificates, inadequate contract documentation, or poor record-keeping practices.

Cross-Border Activities: Out-of-state contractors with Colorado projects often face audit scrutiny regarding nexus determination and use tax obligations.

High Material-to-Labor Ratios: Projects with unusually high material costs relative to labor may indicate potential misclassification of retail sales as real property improvements.

Retailer-Contractor Issues: Mixed-use businesses that fail to properly separate retail sales from construction activities, or inconsistent use of resale certificates.

The Colorado Sales Tax Audit Process

Colorado Department of Revenue audits typically follow this structured process:

1. Initial Contact & Audit Notification

  • Businesses receive official notification specifying the audit period (usually 3-4 years)
  • Initial meeting scheduled to explain audit scope and process
  • Document request list provided

2. Information Gathering Phase Auditors request extensive documentation including:

  • Sales and use tax returns for the audit period
  • General ledger and accounting records
  • Project contracts and specifications
  • Material purchase invoices and receipts
  • Customer invoices and billing records
  • Exemption certificates and resale documentation
  • Subcontractor agreements and payments

3. Fieldwork & Transaction Review

  • Sample testing of transactions across different project types
  • Review of material flows and job costing systems
  • Analysis of contract types and tax treatment classification
  • Examination of TPP vs. real property determinations

4. Issue Identification & Discussion

  • Preliminary findings presented to taxpayer
  • Discussion of disputed classifications or treatments
  • Opportunity to provide additional documentation or explanations
  • Potential adjustment calculations and projections

5. Final Assessment & Appeal Rights

  • Final audit report issued with any additional tax, interest, and penalties
  • 30-day period to file formal protest or appeal
  • Settlement negotiation opportunities may be available

Best Practices for Audit Preparation

Maintain Detailed Project Records:

  • Comprehensive contracts clearly describing work scope and materials
  • Detailed invoices separating materials, labor, and other charges
  • Documentation supporting real property vs. TPP classifications
  • Resale certificates and exemption documentation

Implement Consistent Classification Policies:

  • Written policies for determining real property vs. tangible personal property
  • Regular training for project managers and estimating staff
  • Standardized contract language and billing procedures
  • Periodic internal reviews of classification consistency

Document Decision-Making Processes:

  • Written analysis supporting complex classification decisions
  • Reference to Colorado regulations and guidance for unusual situations
  • Consultation documentation with tax professionals when needed
  • Clear audit trail for all tax-related decisions

Technology and Systems Controls:

  • Job costing systems that properly track materials and labor by project
  • Integration between accounting systems and tax reporting
  • Automated workflows for exemption certificate collection and validation
  • Regular backup and storage of electronic records

Audit Defense Strategies

Professional Representation: Engage qualified tax professionals with construction industry experience to represent the business during audits.

Proactive Documentation: Provide clear, well-organized documentation that supports tax positions before auditors request additional information.

Industry Knowledge: Demonstrate understanding of industry practices and Colorado-specific construction tax rules through detailed explanations and supporting documentation.

Consistent Application: Show that tax treatments have been applied consistently across similar projects and transactions.

Technical Support: Use Colorado Department of Revenue publications, rules, and guidance to support tax position arguments.

Record-Keeping Requirements

Contractors and retailer-contractors must maintain records sufficient to demonstrate the collection and remittance of all applicable state and local sales and uses taxes. Retailers are required to keep and preserve any books, accounts, and records as may be necessary to determine the correct amount of tax for a minimum of three years. Such records include, but are not limited to, copies of receipts, contracts, and sales and use tax returns filed.

Example: A contractor undergoes an audit covering four years of operations. The auditor questions the classification of HVAC equipment as real property improvements rather than tangible personal property sales. The contractor provides detailed documentation showing that all HVAC systems were permanently installed as integral building systems, supported by building permits, engineering specifications, consistent treatment across all projects during the audit period, and references to relevant Colorado Department of Revenue guidance.

10. Voluntary Disclosure Agreements (VDAs)

Voluntary Disclosure Agreements represent a critical risk management tool for construction businesses that have discovered potential sales tax compliance issues before being contacted by the Colorado Department of Revenue. For an industry characterized by complex tax rules, frequent multi-state operations, and evolving business models, VDAs provide an opportunity to address past compliance problems while minimizing penalties, limiting exposure periods, and avoiding the potentially devastating consequences of extended audit investigations.

The construction industry's unique characteristics make VDA opportunities both more common and more valuable than in many other business sectors. The complexity of real property versus tangible personal property determinations means that well-intentioned businesses may discover they have been applying incorrect tax treatment to certain types of work for extended periods. The use of independent contractors and expansion into new geographic markets can create unexpected nexus obligations that businesses may not discover until they conduct compliance reviews or receive professional advice.

When Should Construction Businesses Consider a VDA?

Nexus Discovery: Out-of-state contractors who discover they should have been registered in Colorado due to physical presence, independent contractor activities, or economic nexus triggers.

Classification Errors: Contractors who have been treating taxable tangible personal property installations as non-taxable real property improvements, or vice versa.

Unregistered Operations: Businesses that have been operating in Colorado without proper registration while conducting taxable activities.

Contract Type Confusion: Contractors who have been inconsistently applying lump-sum vs. time-and-materials tax treatment rules.

Use Tax Liabilities: Contractors who have purchased materials from out-of-state suppliers without paying Colorado use tax on those purchases.

Mixed-Use Business Problems: Businesses that have been inconsistently applying tax rules across different types of projects or failing to collect tax on retail sales.

Retailer-Contractor Issues: Businesses that should have been registered as retailer-contractors but have been operating without proper licenses. Contractors engaging exclusively in lump-sum real property improvement contracts may not need a state license. However, contractors with any retail sales activity or operating in home-rule cities must obtain applicable licenses

Example: A Utah electrical contractor has been performing installation work in Colorado for three years using independent contractors, believing this arrangement avoided Colorado tax obligations. Upon consultation with a tax advisor, the contractor learns that the independent contractor arrangements likely created nexus and that some installations should have been treated as taxable tangible personal property sales requiring tax collection.

Benefits of Colorado's VDA Program

Limited Lookback Period: The Colorado Department of Revenue requires a three-year look-back period for sales and use tax when the taxpayer agrees to pay the tax and interest for those three years.

Penalty Relief: Because the taxpayer is coming forward voluntarily, the Department will usually waive any penalty assessment, except if the tax was collected. This can provide substantial savings for construction businesses facing large tax assessments.

Anonymity Protection: The taxpayer and/or their representative may initially contact the Department on an anonymous basis. Anonymity can be maintained until the voluntary disclosure agreement is executed.

Avoid Extended Audits: Voluntary disclosure reduces the risk of discovery through enforcement actions, which could result in longer lookback periods and full penalties.

Compliance Fresh Start: Once completed, the business starts with a clean compliance record, reducing future audit risk.

The Colorado VDA Process

1. Initial Application The process starts with the taxpayer and/or their representative downloading and reviewing VDA documents from Colorado's Voluntary Disclosure Program. Applications can be submitted anonymously through qualified representatives.

2. Required Information The taxpayer must provide certain information, representations, and warranties as explained in the Guide to Statement of Representations and Inducements, including:

  • Statement that the company has not been previously contacted by the Colorado DOR about the liability being disclosed
  • Tax type being disclosed (sales/use tax)
  • Time period being disclosed
  • Detailed business activity information
  • Estimate of tax liability by year

3. Department Review When the Statement of Representations and Inducements is received, it will be reviewed to determine the terms of the agreement the Department is able to offer to the taxpayer. The Department will either request additional information or send a signed agreement back to the taxpayer or their representative for acceptance and signature.

4. Agreement Execution

  • Formal VDA prepared outlining agreed-upon liability and terms
  • Payment arrangements established
  • Registration requirements specified

5. Compliance and Payment

  • Payment of agreed-upon tax and interest amounts
  • Registration with Colorado Department of Revenue
  • Ongoing compliance requirements established

Construction-Specific VDA Considerations

Project-Based Calculations: VDAs for construction businesses often require detailed project-by-project analysis to determine proper tax treatment and calculate liabilities.

Material vs. Labor Allocation: Accurate separation of material costs from labor charges is essential for calculating proper tax obligations under VDA agreements.

Contract Type Analysis: Review of lump-sum vs. time-and-materials contracts to determine appropriate tax treatment under Colorado law.

Subcontractor Documentation: Complete records of subcontractor relationships and payments may be required to determine proper tax treatment.

Geographic Analysis: Multi-county operations require careful analysis of where work was performed to calculate proper local tax obligations.

Nexus Timeline: Documentation of when nexus was first established to determine the appropriate disclosure period.

Eligibility Requirements

No Prior Contact: The Colorado DOR must not have previously contacted the taxpayer about the tax liability.

Colorado-Administered Taxes: The liability must be for taxes administered by the Colorado Department of Revenue.

Good Faith Disclosure: Taxpayers must make complete and accurate disclosures of all known liabilities.

Professional Assistance

Given the complexity of construction tax issues and the importance of presenting the application correctly, most construction businesses benefit from professional assistance:

  • Anonymous Application: Tax professionals can submit applications anonymously to protect the business during initial discussions
  • Liability Calculation: Accurate calculation of construction tax liabilities requires specialized knowledge of Colorado rules
  • Documentation Preparation: Professional assistance ensures all required documentation is properly prepared and submitted
  • Negotiation Support: Experienced representatives can help negotiate favorable terms

Contact Information for Colorado VDA Applications:

Colorado Department of Revenue TAC – Discovery, Rm 128 Attn: Sammy Khakame P.O. Box 17087 Denver, CO 80217-0087

Email: Samwel.Khakame@state.co.us Phone: 303-205-5289

For more information on Colorado's Voluntary Disclosure Program, visit the Colorado Department of Revenue Voluntary Disclosure page.

11. Conclusion

Navigating Colorado's Construction Sales Tax Landscape

Colorado's construction sales tax rules require careful attention to the fundamental distinction between real property improvements and tangible personal property sales. While this distinction may seem straightforward, the practical application often involves complex considerations including installation methods, contract structures, and the intended permanence of installations. Construction businesses that fail to properly classify their work face significant risks including double taxation, audit assessments, and potential unlimited lookback periods for tax liability.

Key Takeaways

The complexity of Colorado's construction tax rules means that contractors, builders, subcontractors, and material suppliers must take a proactive approach to compliance:

  • Classification is Critical: The distinction between real property improvements and tangible personal property sales determines not only what tax rate applies, but who owes the tax. Contractors performing real property improvements under lump-sum contracts pay tax on materials purchased, while those acting as retailer-contractors under time-and-materials contracts collect tax from customers.
  • Contract Structure Matters: The type of contract (lump-sum vs. time-and-materials) fundamentally changes tax treatment. Clear contract language and proper documentation are essential for supporting tax positions during audits.
  • Nexus Considerations: Out-of-state contractors must carefully monitor their Colorado activities, including the use of independent contractors, to avoid unintended tax obligations. Economic nexus thresholds of $100,000 can be triggered quickly through large projects.
  • Documentation is Essential: Maintaining comprehensive project records, contracts, and supporting documentation is crucial for audit defense and compliance support. The burden of proof for tax positions falls on the contractor.
  • Local Tax Complexity: Colorado's mix of state-administered and self-administered local taxes, including home-rule cities, requires careful attention to sourcing rules and rate calculations.
  • Retailer-Contractor Requirements: Mixed-use businesses must maintain separate accounting and obtain proper licensing when acting as retailers of tangible personal property.

Tax is Due Either on the Purchase Side or the Sale Side — Not Both

One of the fundamental principles of Colorado construction taxation is that tax should be paid once, but not twice, on the same transaction. Understanding whether you're operating under the "contractor model" (paying tax on materials) or the "retailer model" (collecting tax from customers) is essential for proper compliance and competitive pricing.

Compliance Challenges and Solutions

Construction businesses face several industry-specific compliance challenges that require tailored solutions:

  • Mixed-Use Operations: Contractor-retailers who both sell materials at retail and perform installation services must maintain separate accounting and apply different tax rules to each type of transaction.
  • Technology Integration: Modern construction businesses benefit from integrated systems that properly track materials, labor, and tax obligations across multiple projects and transaction types.
  • Staff Training: Project managers, estimators, and billing staff must understand basic tax concepts to ensure proper classification and documentation throughout the project lifecycle.
  • Vendor Management: Establishing proper relationships with material suppliers, including appropriate use of resale certificates and exemption documentation, is essential for compliance.

Ongoing Compliance Requirements

As Colorado's construction industry continues to evolve with new technologies, materials, and business models, tax rules may also evolve. Construction businesses must stay current by:

  • Regular Training: Provide ongoing training to staff on tax classification and compliance requirements
  • Professional Consultation: Work with qualified tax professionals who understand construction industry complexities
  • Internal Reviews: Conduct periodic internal reviews of tax classifications and compliance procedures
  • Technology Updates: Ensure accounting and project management systems properly support tax compliance requirements
  • Regulatory Monitoring: Stay informed about changes to Colorado tax laws and regulations affecting construction

Risk Management

Effective construction tax compliance involves managing multiple types of risk:

  • Financial Risk: Incorrect tax treatment can result in significant assessment exposure, particularly for large projects
  • Competitive Risk: Improper tax treatment can lead to non-competitive pricing or unsustainable profit margins
  • Audit Risk: Poor documentation and inconsistent application of tax rules increase the likelihood of adverse audit outcomes
  • Nexus Risk: Expanding operations or using independent contractors can create unexpected tax obligations

By implementing proper tax practices from project inception through completion, construction businesses can minimize these risks while maintaining competitive advantage and profitability.

The construction industry's unique tax challenges require specialized knowledge and careful attention to detail. By understanding Colorado's rules and working with experienced professionals when needed, contractors can focus on what they do best—delivering quality construction services—while maintaining full compliance with Colorado's tax laws.

12. References and Resources

Colorado Department of Revenue Resources

Primary Sales Tax Information:

Construction-Specific Guidance:

Key Colorado Statutory & Regulatory References

Colorado Revised Statutes:

  • Title 39, Article 26: Colorado Sales and Use Tax Act
  • Section 39-26-102: Definitions and scope of sales tax
  • Section 39-26-104: Exemptions from sales tax
  • Section 39-26-202: Use tax provisions

Colorado Code of Regulations:

  • 1 CCR 201-5, SR-10: Contractors
  • 1 CCR 201-4, Reg. 39-26-102.15: Definition of tangible personal property
  • 1 CCR 201-4, Reg. 39-26-708.1: Exempt construction contracts
  • 1 CCR 201-4, Reg. 39-26-708.3: Exempt construction contracts
  • 1 CCR 201-4, Reg. 39-26-718: Charitable organizations

Essential Forms

Registration and Compliance:

Exemption and Resale Documentation:

  • Form DR 5002: Declaration of Wholesale or Entity Sales Tax Exemption
  • Multistate Tax Commission Uniform Sales & Use Tax Exemption/Resale Certificate: For out-of-state transactions

Tax Rate Information:

Nexus and Out-of-State Business Resources

Nexus Information:

  • Out-of-State Businesses: Colorado Nexus Requirements
  • Economic Nexus Guidelines: Information for remote sellers meeting $100,000 threshold

Audit & Compliance Resources

Voluntary Disclosure Program:

Electronic Services:

  • Revenue Online: Electronic filing and payment portal — Colorado Revenue Online
  • License Verification: Online verification of sales tax licenses and exemption certificates

Professional Development and Training

Educational Resources:

Customer Service and Support

Contact Information:

  • Taxpayer Services: 303-238-7378
  • Business Hours: 8:00 AM to 5:00 PM Mountain Time, Monday through Friday
  • Online Services: Available 24/7 through Revenue Online

Local Tax Resources

Local Jurisdiction Information:

Industry Organizations and Additional Resources

Multi-State Resources:

  • Multistate Tax Commission: MTC Voluntary Disclosure Program for businesses with liabilities in multiple states
  • Streamlined Sales Tax: Information for multi-state compliance simplification

Court Cases and Legal Precedents:

  • Craftsman Painters & Decorators, Inc. v. Carpenter: 111 Colo. 1, 137 P.2d 414 (1942) – contractor's liability for use tax
  • Raynor Door, Inc. v. Charnes: 765 P.2d 650 (Colo. App. 1988) – tangible personal property used in construction
  • Noble Energy v. Colo. Dept. of Rev.: 232 P.3d 293 (Colo. App. 2010) – tangible personal property used in construction

Disclaimer and Important Notes

Legal Disclaimer: This guide is intended as an overview and does not constitute legal or tax advice. Tax laws are complex and change frequently. Always consult current Colorado statutes, regulations, and official Department of Revenue guidance for the most up-to-date information.

Professional Consultation: Given the complexity of construction tax rules, businesses are strongly encouraged to consult with qualified tax professionals who have experience with Colorado construction taxation before making significant tax decisions.

Updates and Changes: Tax laws and regulations may change. Businesses should regularly check the Colorado Department of Revenue website for updates and changes to tax requirements.

Disclaimer: This guide is intended as an overview and does not constitute legal or tax advice. Always consult a qualified tax professional or attorney for advice specific to your business situation.

Get answers for your Colorado construction questions

Create a free Sales Tax Helper account to check your nexus exposure and keep your Colorado compliance on track. Need a hand? Our attorneys, CPAs, and former state auditors are ready to help.

Need Expert Help?

Our team of attorneys, CPAs, and former state auditors handles exactly these situations. Free consultation — no obligation.

Get Started FreeContact Us